Tuesday, January 11, 2011

Clear QAM Channels remapping in Windows Media Center.

We have Verizon FiOS internet and TV service. We've had it for years now and love the speed of the internet and the relative slickness of the TV and DVR guide service.

However, I love to push the envelope so I've set up a few Windows 7 PCs with Media Center to use TV tuner cards and a Silicon Dust HDHomeRun network tuner. These tuners can either get over-the-air ATSC content or Clear QAM digital cable channels. They can't get encrypted digital cable channels (that will be solved by the upcoming HDHomeRun Prime network tuner or the existing Ceton card). Most cable providers only allow the local channels and maybe a few extra channels, like the Weather Channel, via unencrypted Clear QAM.

In any case, this was a supplement to our regular FiOS DVR and cable boxes so it has never been a priority. That said, I always like things to work properly.

Alas, when using the PC tuners to get ATSC OTA content, I could never get a consistent signal via antenna because of the location of our house. We get horrible cell phone reception and even radio reception is so-so. Digital TV reception has been less than desirable.

So, since we already had FiOS TV service, I had tried using the Clear QAM feed over the coax cable to get the local channels in Windows Media Center. Almost immediately after setting this up, weird things would happen. After a few days, channel 5.1 and 20.1 would switch, as would 4.2 and 50.3. Other channels would switch seemingly at random intervals. Different PCs in the house would have different channel mappings. It all seemed so random.

After searching the Internet for a solution I finally gave up for a while and went back to the antenna. But a few months ago I had enough and decided to figure it out once and for all.


I did some digging and the issue was NOT Verizon. The back-end Clear QAM channel numbers never changed. You can find the Clear QAM channel mapping on sites like SiliconDust. If you manually enter the channels in the settings, the channels never change.

After some trial and error, I found out that it was the Windows Media Center guide update and scanning process that was screwing them up for some reason.

I found the solution. Here is a recent post about it:
http://social.answers.microsoft.com/Forums/en-US/mediacenter/thread/f650a689-b7f1-4382-ac3a-4d9ddcbe75d3

Also see: http://www.technixupdate.com/disable-stop-or-block-mcglidhost-exe-from-running/

Basically, you need to disable the BackgroundScanner. For the most part this works fine, except if you need to rescan for channels. In which case you can re-enable it.

In the Registry Editor, go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\BackgroundScanner.


Set the PeriodicScanEnabled DWORD value to 0

The SiliconDust HDHomeRun software for Windows has a checkbox in the settings to do this for you. If you have another tuner card you can edit the registry as mentioned in the link above.

6 comments:

Anonymous said...

I've been trying to figure out why this happens for over a year. I also have been searching everywhere like crazy and thought it was FiOS. Thank you for looking into this!! Giving that solution a try now...

Joelsef said...

I hope it works for you! Like you I was banging my head for over a year until I stumbled across the solution tucked away in one corner of the web.

I wish I knew why Clear QAM digital cable gives Windows Media Center so much trouble. I hear that using a CableCard tuner with WMC does not have this problem, which is something I'm hoping to try once the SiliconDust HDHomeRun Prime comes out.

BarryL said...

I have recently gone from XP PRO with an ATI-WONDER hooked to my COMCAST box with the the channel set to "3" to play through the Video Card and this has worked great for 5 years. Hence, New Windows 7 PRO machine with dual monitors, Hauppague HVR-1850 Tuner and FiOS Service now. All I want to do is set tuner in PC to Channel 3 and have the FiOS box control changing channels. Love two monitors for spread sheet but only want to see smaller window open for TV viewing and don't have room in office for another TV.
Help!

Joelsef said...

Barry, I suggest looking into a CableCard tuner for Windows 7 like the HDHomeRun Prime or Hauppague WinTV. I've played with both and they work very nicely for piping hot digital cable into your Win7 PC. :-)

Fred Philibert said...

I am using a SiliconDust HDHomerun tuner with FiOS Clear QAM... works great. BUT.... I have the same problem with my Windows Media Center suddenly loosing some channels.

I have two Vizio TVs running clear QAM on FiOS as well. They lost most channels, and a re-scan won't find them. FiOS is no help at all; you *MUST* have a set top box for it to work. It was a quirk that it worked for a year and a half. Oddly, the SiliconDust tuner still gets the channels in the QuickTV utility, but WMC can't find them!

I wish our FCC would stomp it's tiny little feet and mandate that cable companies follow standards. I can dream, can't I?

Anonymous said...

THANK YOU THANK YOU THANK YOU